Philips MC-220 warranty Specifications / Maintenance

Specifications / Maintenance

E n g l i s h

AMPLIFIER
Output power		2 x 10 W RMS
.................................................................		20 W total power
Signal-to-noise ratio		≥ 65 dBA (IEC)
Frequency response	40 – 20000 Hz, ± 3 dB
Input sensitivity AUX		0.5 V (max. 2 V)
Impedance loudspeakers			8 Ω
Impedance headphones		32 Ω -1000 Ω
CD PLAYER
Frequency range		20 – 20000 Hz
Signal-to-noise ratio			75 dBA
TUNER
FM wave range		87.5 – 108 MHz
AM wave range		530 – 1700 kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio			............ 2.8 ∝V
– stereo, 46 dB signal-to-noise ratio			........ 61.4 ∝V
Selectivity			≥ 28 dB
Total harmonic distortion			≤ 5%
Frequency response	63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio			≥ 50 dBA

TAPE DECK Frequency response

Normal tape (type I) ... 120 – 10000 Hz (8 dB)

Signal-to-noise ratio
Normal tape (type I)	.................................... 48 dBA
Wow and flutter	≤ 0.4% DIN

SPEAKERS Bass reflex system

Dimensions (w x h x d) . 140 x 231 x 216 (mm)

.....................................................	5.51 x 9.09 x 8.5 (inch)
GENERAL INFORMATION
AC Power Voltage	120 V / 60 Hz

Dimensions (w x h x d) .. 140 x 231 x 280 (mm)

................................................ 5.51 x 9.09 x 11.02 (inch)

Weight (with/without speakers) ..................................

............................................................... approx. 6.7 / 3.0 kg

............................................... approx. 14.8 / 6.62 pound

Standby power consumption < 3 W

Cleaning the Cabinet

●Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

●When a disc becomes dirty,

clean it with a cleaning cloth. Wipe the disc from the center out.

● Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Cleaning the disc lens

●After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

Cleaning the Heads and the Tape Paths

●To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of

tape operation.

●Use a cotton swab slightly moistened with cleaning fluid or alcohol.

●You can also clean the heads by playing a cleaning tape once.

A A B C

Demagnetizing the heads

●Use a demagnetizing tape available at your dealer.

Subject to modification

20