Philips MC-i250 warranty Registration, Preparations, For wired operation Ethernet, E n g l i s h

Preparations

For wired operation (Ethernet)

gateway
router
	DSL or
	cable modem
from
RJ45	INTERNET
	Data port
	Power outlet

After the Internet connection of a PC in the home network has proven to be working, connect the MC-i250 to the gateway router with the supplied cable. Press INTERNET.

The Streamium MC-i250’s network settings are by default set to ‘DHCP’ (dynamic IP addressing) and ‘NO PROXY’. When your router is configured as a DHCP server and your ISP does not use a proxy, the set should automatically establish a connection to the Internet.

If your home network uses static IP addressing, you will have to set a static IP address, network mask, default gateway and two DNS servers.

This information can be obtained from your ISP. Also, if your ISP uses a proxy server, you will have to enter the proxy name and proxy port.

Information you might need for setup (can be requested from your ISP):

●Does the network use static or dynamic (DHCP) IP addressing?

➜In DHCP, an IP address is automatically assigned to the set. In static IP mode, the information mentioned above has to be entered using the remote control.

●Does the ISP use a proxy?

➜If yes, what is the proxy name and proxy port?

●Does the ISP only allow registered devices to use DHCP?

➜If yes, you might have to tell the ISP the set’s MAC address (can be found in ‘SET OPTIONS’ under ‘NETWORK INFO’).

As soon as you are asked to enter your email address on the screen, your set has successfully established a connection to the Internet.

To activate the online features of MC-i250, you still have to complete the registration.

Registration

1Enter your email address (using the remote control) on the set and press OK/PLAY (2).

2After a short moment you will receive an e-mail at the entered address. Create your account with “http://My.Philips.com” and activate music services by following the instructions received in that e-mail.

–Use the numerical/alphabetical keypad on the remote control to enter your e-mail address.

–To delete a character, press S to move the cursor backward.

–To exit the registration mode without storing, press Ç.

–Press OK (2) to confirm your entry. Your registration confirmation details will be e-mailed to you.

–Registration is only available for the default user.

E n g l i s h

15