Preparations
CSpeakers connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to "L", colored (marked) wire to "+" and black (unmarked) wire to
1 | 2 |
●Fully insert the stripped portion of the speaker wire into the terminal as shown.
Notes:
–To avoid magnetic interference, do not position the front speakers too close to the PC monitor/TV.
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
Notes:
–Do not connect equipment to both the LINE OUT and AUX/CDR IN terminals at the same time. Otherwise, noise will be generated and malfunction might occur.
–If you are connecting equipment with a monaural output (a single audio out terminal), connect it to the AUX/CDR IN left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound will still remain mono).
Subwoofer out connection
Connect the subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass sound effects (explosions or the rumble of spaceships, for example).
Inserting batteries into the remote control
Insert two batteries (type R06 or AA) into the remote control with the correct polarity as indicated by the “+” and
English
Optional connections
The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.
Analog audio connections
AUX/CDR IN (R/L)
Use a cinch cable to connect these terminals to the analog audio out terminals of an external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder), for listening to this source.
LINE OUT (R/L)
Use a cinch cable to connect these terminals to the analog audio inputs of any analog audio equipment (amplifier/receiver or tape recorder, for example), for playback or performing analog recording.
CAUTION!
–Remove batteries if they are exhausted or will not be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so dispose of them properly.
13
