Connections
Step 2: Connecting the speakers
Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", colored (marked) wire to "+" and black (unmarked) wire to
Notes:
–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
Step 3: Connecting to PC
(page 3 - P5)
Use the supplied USB cable to connect the system to your personal computer’s USB port. You are able to playback your music collection via the system after installing the USB PC LINK application software onto your PC (refer to “USB PC Link”).
Step 5: Inserting batteries into the remote control
3
1
2
1Open the battery compartment cover.
2Insert two batteries type R06 or AA, matching the markings
3Close the cover.
Using the remote control to operate the system
1Aim the remote control directly at the remote sensor (iR) on the main unit.
2Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER).
3Then select the desired function (for example
ÉÅ, í, ë).
E n g l i s h
Step 4: Connecting the AC power cord
"AUTO INSTALL - PRESS PLAY" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time.
Press ÉÅ on the main unit to store all available radio stations (page 3 - P3) or press Ç to exit (refer to “Tuner Operations”).
CAUTION!
–Remove batteries if they are exhausted or will not be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so they should be disposed of properly.
13
3139 115 22181