14
English
3140 115 30051
Radio Reception
BAND
RDS
CLOCK
TIMER
ON
OFF
PROGRAM
PREV NEXT
STOP
iR
PLAY•PAUSE
SOURCE
SELECT
SHUFFLE
STANDBY-ON PROGRAM REPEAT
Tuning to radio stations
1Select TUNER source.
➜TUNER is displayed briefly.
2Press BAND once or more to select your
waveband.
3Press down on TUNING à or á and release
button.
➜The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
➜If a FM station is received in stereo, STEREO is
shown.
4Repeat step 3 if necessary until you find the
desired station.
●To tune to a weak station, press TUNING à
or á briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1Press PRESET 3 or 4 (on the remote control
¡ or ™ ) to select the preset number where
programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROGRAM for more than 2 seconds to
activate programming.
➜AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW and LW. The last
preset automatically stored will then be played.
Manual programming
1Tune to your desired station (see Tuning to radio
stations).
2Press PROGRAM to activate programming.
➜PROGRAM flashes in the display.
3Press PRESET 3 or 4 (on the remote control
¡ or ™ ) to allocate a number from 1 to 40 to
this station.
4Press PROGRAM again to confirm the setting.
➜PROGRAM disappears, the preset number and
the frequency of the preset station are shown.
5Repeat the above four steps to store other
stations.
●You can override a preset station by storing
another frequency in its place.