Philips MC192DMG, MC132DMG owner manual Sleep Timer, Sleep timer during a recording

MC132DMG/MC192DMG 3/22/02 1:21 PM Page 47

Use the sleep timer to program the TV/VCR to shut off in a certain amount of time.

Sleep Timer 47

1 Press the SLEEP/WAKE UP button (located on the upper right corner of the remote).

TO ADJUST PRESS s / B

–	TIMER–
>	SLEEP
		OFF
	WAKE UP
	ON-TIME

2 Press the PLAY/o button or the STOP/p but- ton to select SLEEP. Then press the

POWER

PLAY

REW

STOP

MENU STATUS/EXIT

SLEEP/WAKE UP

F.FWD

CLEAR

1

2

3

REW(ind)/s button or the F.FWD/B button to select 30 MIN(utes), 60 MIN(utes), 90 MIN(utes), or 120 MIN(utes). (You cannot set

the sleep timer during a recording.)

TO ADJUST PRESS s / B

–	TIMER–
>	SLEEP
		30 MIN
	WAKE UP
	ON-TIME

3 Press the STATUS/EXIT button. The TV/VCR will shut itself off after the specified amount of time. One minute before the TV/VCR shuts itself off, the seconds will count down on the screen.

GOOD NIGHT appears on the TV/VCR screen 10 seconds before the TV/VCR shuts itself off.

1	2	3
4	5	6	CH.
7	8	9
	0	ALT.CH	VOL.
SPEED	MEMORY	PAUSE/STILL
REC/OTR	TRACKING		MUTE

Helpful Hints

•To cancel the sleep timer, press the SLEEP/WAKE UP button. Press the PLAY/o button or the STOP/p button to select SLEEP, then press the REW(ind)/s but- ton or the F.FWD/B button to select OFF. Press the STATUS/EXIT button.

•To see how much time remains before the TV/VCR shuts itself off, press the SLEEP/WAKE UP button once. If necessary, press the PLAY/o button or the STOP/p button to select SLEEP. The remaining time will appear beside SLEEP. To remove the display, press the STATUS/EXIT button.

•If you start a recording after you set the Sleep Timer, the Sleep Timer will be cancelled.