Basic Functions
IMPORTANT: |
Before you operate the system, complete the preparation procedures.
Switching the system on
●Press 2 STANDBY ON or SOURCE SELECT.
➜The system will switch to the last selected source.
●Press CD, TUNER, TAPE or AUX on the remote control.
➜The system will switch to the selected source.
To switch the system to standby mode
●Press 2 STANDBY ON on the system or remote control.
●If in tape mode or recording mode, press STOP•OPEN first.
➜ The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player's memory.
Adjusting volume and sound
1Turn the VOLUME control
decrease or clockwise to increase volume on the system (or press VOL
control).
➜Display shows the volume level VOL and a number from
2Press DSC repeatedly to select the desired
sound effect: CLASSIC (no indication)/ ROCK () / JAZZ () / POP ().
3Press DBB to switch bass enhancement on or off.
➜Display shows: if the DBB is activated.
4Press INCREDIBLE SURR. (IS on the remote control) to switch the surround sound effect on or off.
➜Display shows: if activated.
Note:
–The effect of INCREDIBLE SURROUND may vary with different types of music.
5Press MUTE on the remote
control to interrupt sound reproduction instantly.
➜ Playback will continue without sound and the display shows MUTE.
●To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
E n g l i s h
Power-saving automatic standby
As a
11