Specifications / Maintenance
AMPLIFIER |
|
|
|
Output power | 2 x 5 W RMS | ||
......................................................................... | 200 W PMPO | ||
≥ 65 dBA (IEC) | |||
Frequency response | 40 – 20000 Hz, ± 3 dB | ||
Input sensitivity AUX | 0.5 V (max. 2 V) | ||
Impedance loudspeakers | 8 Ω | ||
Impedance headphones | 32 Ω – 1000 Ω | ||
CD PLAYER |
|
|
|
Frequency range | 20 – 20000 Hz | ||
| 75 dBA | ||
TUNER |
|
|
|
FM wave range | 87.5 – 108 MHz | ||
MW wave range (9 kHz) | 531 – 1602 kHz | ||
MW wave range (10 kHz) | 530 – 1700 kHz | ||
Tuning grid |
| 9/10 kHz | |
Sensitivity at 75 Ω |
|
|
|
– mono, 26 dB | ............ 2.8 ∝V | ||
– stereo, 46 dB | ........ 61.4 ∝V | ||
Selectivity |
| ≥ 28 dB | |
Total harmonic distortion | ≤ 5% | ||
Frequency response | 63 – 12500 Hz (± 3 dB) | ||
| ≥ 50 dBA |
TAPE DECK
Frequency response
Normal tape (type I) ... 120 – 10000 | Hz (8 dB) | |
|
| |
Normal tape (type I) | 48 dBA | |
Wow and flutter | ≤ | 0.4% DIN |
SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 156 x 231 x 190 (mm)
GENERAL INFORMATION |
| |
AC Power |
|
|
For | ..... | |
| ||
For Version /30 | 230 | – 240 V; 50 Hz |
Dimensions (w x h x d) | .. 140 x 231 x 280 (mm) | |
Weight (with/without speakers) | ||
............................................................... | approx. 5.7 / 2.7 kg | |
Standby power consumption | < 3 W |
Cleaning the Cabinet
●Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.
●Do not use solvents such as benzene, thinner, commercially
available cleaners, or antistatic spray intended for analogue records.
Cleaning the disc lens
●After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Cleaning the Heads and the Tape Paths
●To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of
tape operation.
●Use a cotton swab slightly moistened with cleaning fluid or alcohol.
●You can also clean the heads by playing a cleaning tape once.
A A B C
Demagnetising the heads
●Use a demagnetising tape available at your dealer.
E n g l i s h
Subject to modification
19