Basic Functions, Switching the system on, Source

Basic Functions

IMPORTANT!

Before you operate the system, complete the preparation procedures.

● Press 2 STANDBY ON or SELECT

➜ The system will switch to the last selected

1Turn the VOLUME control anti-clockwise to

decrease or clockwise to increase volume on the system (or press VOL -/+on the remote

control).

➜Display shows the volume level VOL and a number from 0-32.

2Press DSC repeatedly to select the desired

sound effect: CLASSIC (no indication)/ ROCK ( ) / JAZZ ( ) / POP ( ).

3Press DBB to switch bass enhancement on or off.

➜Display shows: DBB if the DBB is activated.

4Press INCREDIBLE SURR. (IS on the remote control) to switch the surround sound effect on or off.

➜Display shows: if activated.

Note:

–The effect of INCREDIBLE SURROUND may vary with different types of music.

source.

● Press CD, TUNER, TAPE or AUX on the

remote control.

➜ The system will switch to the selected source.

5Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound and the display shows MUTE.

DSCDBB

MUTE

●Press 2 STANDBY ON on the system or remote control.

●If in recording mode, press STOP 9 first.

➜ The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player's memory.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.

As a power-saving feature, the system automatically switches to standby 15 minutes after a tape or CD has reached the end and no control is operated.