Radio Reception
English |
Tuning to radio stations
1Select TUNER source.
➜TUNER is displayed briefly.
2Press BAND once or more to select your waveband.
3Press down on TUNING à or á and release button.
➜The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.
➜If a FM station is received in stereo, STEREO is shown.
4Repeat step 3 if necessary until you find the desired station.
●To tune to a weak station, press TUNING à or á briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already.
1Press PRESET 3 or 4 (on the remote control ¡ or ™ ) to select the preset number where programming should start.
Note:
–If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROGRAM for more than 2 seconds to activate programming.
➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW and LW.The last preset automatically stored will then be played.
Manual programming
1Tune to your desired station (see “Tuning to radio stations”).
2Press PROGRAM to activate programming.
➜PROGRAM flashes in the display.
3Press PRESET 3 or 4 (on the remote control ¡ or ™ ) to allocate a number from 1 to 40 to this station.
4Press PROGRAM again to confirm the setting.
➜PROGRAM disappears, the preset number and the frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
14
