Radio Reception
English |
2; |
Tuning to radio stations
Manual programming
1Press SOURCE on the set or TUNER on the remote repeatedly until the desired waveband (FM) is displayed.
2Press and hold TUNING 22/33 and release the button.
➜ The radio automatically tunes to a station with sufficient reception.
3Repeat Step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING 22/33 briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store up to a total of 20 radio stations in the memory.
Automatic programming
Press PROG/ANGLE on the remote for more than three seconds to activate programming.
➜All available stations are programmed.
➜AUTO is displayed and available stations are programmed in order of waveband.
1Tune to your desired station (refer to “Tuning to radio stations”).
2Press PROG/ANGLE to activate programming.
➜ PROG flashes on the display.
3Press í/ë to allocate a number from 1 to 20 to this station.
4Press PROG/ANGLE again to confirm the setting.
➜ PROG disappears.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press í/ë until the desired preset station is displayed.
29
