Connections

Step 4: Connecting the power cord

IMPORTANT!

Never make or change any connection with the power switched on.

After everything is connected properly, plug in the AC power cord to the power socket.

Step 5: Connecting a VCR or cable/satellite box

ANTENNA FM

(75)

Viewing and listening to playback

1Connect the VCR or Cable/Satellite Box to the TV system as shown.

2Using the audio cables (red/white, not supplied) Connect the system’s AUX IN (L/R) jacks to the AUDIO OUT jacks on the VCR or Cable/ Satellite box.

Before starting operation, press AUX on the remote control to select “AUX” in order to activate the input source.

English

Using the VCR for recording DVDs

Some DVDs are copyright-protected.You cannot record or dub protected discs using a VCR.

3Connect the system’s COMPOSITE VIDEO jack to the VIDEO IN jack on the VCR.

4Connect the system’s LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channel, right and left) recording.

To view DVD playback while recording You must connect the system to your TV system using the S-VIDEO (as shown above) or the COMPONENT VIDEO OUT (Pr Pb Y) video connection.

9

Page 9
Image 9
Philips MCD129/93 Connecting the power cord, Connecting a VCR or cable/satellite box, Viewing and listening to playback