English
Connections |
|
|
Step 2: Connecting speakers | FM Antenna | |
1 | 2 |
|
Connect the speaker wires to the SPEAKER |
| |
terminals, right speaker to "R" and left speaker to | ● For better FM stereo reception, connect an | |
"L", coloured (marked) wire to "+" and black |
| |
(unmarked) wire to | outdoor FM antenna to the FM AERIAL (FM | |
ANTENNA) terminal. | ||
portion of the speaker wire into the terminal as | ||
| ||
shown. |
|
Notes:
–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
Step 3: Antenna connection
Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
Step 4: Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following options, depending on the capabilities of your TV system.
–Connect the DVD system directly to the TV.
Using Video In jack (CVBS)
MW Antenna
1 Use the composite video cable (yellow) to connect the system's VIDEO jack to the video input jack (or labelled as A/V In,Video In, Composite or Baseband) on the TV set.
2 To hear the sound of this DVD Player through your TV, use the audio cables
●Position the antenna as far as possible from a TV, VCR or other radiation source.
14
