|
| Clock/Timer |
M I C R O T H E A T R E M C D 1 9 6 | English | |
| SOURCE | |
DISPLAY/CLOCK SET |
|
|
|
| CLOCK |
DBB | - VOLUME + |
|
DSC |
|
|
| iR |
|
|
| PRESET |
AUX |
|
|
|
| TUNING |
Clock setting
See
Timer setting
●The system can be used as an alarm clock, whereby DISC or TUNER is switched on at a set time (one time operation).The clock time needs to be set first before the timer can be used.
1In standby mode, press and hold SLEEP/ TIMER on the remote control for more than three seconds.
➜ "SET TIMER" is displayed briefly.Then, the hour digits flash on the display panel.
2Pressí/ë on the front panel or on the remote control to set the hours and press SLEEP/TIMER to confirm.
➜ The minute digits flash on the display panel.
3Pressí/ë on the front panel or on the remote control to set the minutes and press SLEEP/TIMER to confirm.
4In standby mode, press TIMER on the remote control to activate or deactivate the timer.
➜ Display shows 
if activated, and disappears if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off by itself after a set period of time.
1In active mode, press SLEEP/TIMER on the remote control repeatedly to select a preset time.
➜ The selections are as follows (time in minutes):
SLEEP OFF ™ SLEEP 90 ™ SLEEP 80 ™ SLEEP 70 ™ SLEEP 60 ™ SLEEP 50 ™ SLEEP 40 ™ SLEEP 30 ™ SLEEP 20 ™
SLEEP 10™ SLEEP OFF
2When you reach the desired length of time, stop pressing the SLEEP/TIMER button.
To deactivate the sleep timer
●Press SLEEP/TIMER repeatedly until "SLEEP OFF" is displayed, or press STANDBY ON y (or y on the remote).
33
