Philips MCD288 Brightness, Contrast, Hue, Saturation, Digital OUT, 3D Processing, Lpcm, Downmix

System Menu Options

English

BRIGHTNESS

Adjusts the brightness level. Range: 0-12.

CONTRAST

Adjusts the contrast level. Range: 0-12.

HUE

Adjusts the hue level. Range: -6-+6.

SATURATION

Adjusts the saturation level. Range: 0-12.

AUDIO SETUP

The options included in AUDIO SETUP page are: "DIGITAL OUT", "DOWNMIX", "3D PROCESSING", "LPCM" and "NIGHT MODE".

DIGITAL OUT

➜DIGITAL/OFF:Turns off the digital output.

➜DIGITAL/RAW: If you have connected your DIGITAL OUT to a multi-channel decoder/ receiver.

➜DIGITAL/PCM: Only if your receiver is not capable of decoding multi-channel audio.

3D PROCESSING

3D processing provides a virtual surround sound experience using just two speakers.

➜OFF, CONCERT, CHURCH, PASSIVE, WIDE and LIVE

LPCM

If you connect the DVD Player to a PCM compatible receiver via the coaxial terminal, you may need to adjust 'LPCM'.

Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.

➜48kHz: Playback a disc recorded at the sampling rate of 48kHz.

➜96kHz: Playback a disc recorded at the sampling rate of 96kHz.

➜192kHz: Playback a disc recorded at the sampling rate of 192kHz.

NIGHT MODE

➜OFF: Select this when you want to enjoy the surround sound with its full dynamic range.

➜ON: Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.

This feature is only available for movies with Dolby Digital mode.

DOWNMIX

This options allows you to set the stereo analogue output of your DVD Player.

➜LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

➜STEREO: Select this option when output

delivers sound from only the two front speakers.

➜VSS: Allows the DVD player to use virtual surround sound effects.

34