Getting Started
Step 3: Setting language |
| Setting the Audio, Subtitle and Disc |
| ||
Menu language |
| ||||
preference |
| ||||
| |||||
English
You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead.The OSD language in the system menu will remain once selected.
Setting the OSD Language
1Press SYSTEM.
2Press 1 2 to select “General Setup Page”.
3Use 1 2 3 4 on the remote to navigate in the menu.
Move to “OSD Lang” and press 2.
4Select a language and press OK.
To exit from the menu
●Press SYSTEM again.
1Press SYSTEM in stop mode.
2Press 1 2 to select “Preference Page”.
3Press 3 4 to highlight the following in the Preference Page.
–“Audio” (disc’s soundtrack)
–“Subtitle” (disc’s subtitles)
–“Disc Menu” (disc’s menu)
4Enter its submenu by pressing 2.
5Select a language and press OK.
6Repeat steps 3~5 for other language settings.
To exit from the menu
●Press SYSTEM again.
If you choose OTHERS in Audio, Subtitle or Disc Menu,
1Press 3 4 to highlight “Others”.
2Press OK.
3When you are asked to enter a language code, input a language code by using the Numeric Keypad
4Press OK to confirm.
42
