English
33

Setting sleep/wake-up timer

Sleep timer setting
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1In power-on mode, press SLEEP/TIMER on
the remote repeatedly to select a preset time.
➜The selections are as follows (time in
minutes):
00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70
➜ 80 ➜ 90 ➜ 00
2When you reach the desired length of time, stop
pressing SLEEP/TIMER.
➜”SLEEP” appears.
To deactivate the sleep timer
●Press SLEEP/TIMER repeatedly until “00” is
displayed, or press STANDBY-ONB (B on
the remote).
In standby mode, the timer setting enables the
system to switch on automatically at a set time.
Wake-up timer setting
IMPORTANT!
–Before setting the timer, ensure that
the clock is set correctly.
1Press and hold SLEEP/TIMER until the time
flashes on the display.
➜”TIME SET” scrolls. Then, the hour digits
flash on the display screen.
2Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
3Press SLEEP/TIMER to confirm.
➜The minute digits flash on the display screen.
4Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
Other Functions
5Press SLEEP/TIMER to confirm the time
setting.
➜”OFF” flashes on the display screen.
6 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to select
“ON”.
➜ icon appears on the display screen.
To deactivate the timer
●Select “OFF” at Step 6.
pg 001-040_MCD706_98_Eng 2007.6.22, 16:3333