Philips MCD706, MCD706/98 6, 7, 8, 9, 0, 1, 2

18
English
Getting Started
6Press 1 2 repeatedly to select "VIDEO SETUP
PAGE".
7Select "TV MODE" to "P-SCAN", then OK to
confirm.
➜The instruction menu appears on the TV.
8Press 1 2 to highlight OK in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9Turn on your TV progressive scan mode (refer
to your TV user manual).
➜The below menu appears on the TV.
0Press 1 2 to highlight OK in the menu and
press OK to confirm.
➜The setup is complete now and you can start
enjoy the high quality picture.
To deactivate Progressive manually
● When the distorted sign still appears on
the TV, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
1Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
2Press SYSTEM MENU on the remote to exit
the system menu and then DISC and “1” to exit
progressive scan.
➜The DVD blue background screen will appear
on the TV.
Note:
–During normal playback in the progressive scan
mode, pressing DISC button and “1” will exit the
progressive scan mode.
pg 001-040_MCD706_98_Eng 2007.6.22, 16:3318