Philips MCD709 user manual English Using Composite Video jack, Using Component Video jacks Y Pb Pr

Connections

English

Using Composite Video jack

1Use the composite video cable (yellow) to connect the system's VIDEO OUT jack to the video input jack (or labelled as A/V In,Video In, Composite or Baseband) on the TV set.

2To hear the TV channels through this DVD system, use the audio cables (white/red-not supplied) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

Using Component Video jacks (Y Pb Pr)

IMPORTANT!

–The progressive scan video quality is only possible when using Y Pb Pr, and a progressive scan TV is required.

2 1

1Use component video cables (red/blue/green - not supplied) to connect the DVD system's Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.

2To hear the TV channels through this DVD system, use the audio cables (white/red-not supplied) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

3If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual. For DVD system Progressive Scan function, see ÒGetting Started- Setting up Progressive Scan featureÓ.

Note:

–If your TV does not support Progressive Scan, you will not be able to view the picture.

Press SYSTEM on the remote to exit the system menu and then DISC to exit progressive scan.

12