Philips MCD709 Using S-Videojack, Connections, English, 1Use the composite video cable yellow to

Models: MCD709

1 42
Download 42 pages 59.53 Kb
Page 13
Image 13
Using S-Video jack

Connections

Using S-Video jack

Using an accessory RF modulator

English

IMPORTANT!

If S-Video is used for DVD playback connection, the system’s VIDEO OUT setting will need to be changed accordingly.

2

1

1Use an S-Video cable (not supplied) to connect the DVD systemÕs S-VIDEO jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV.

2To hear the TV channels through this DVD system, use the audio cables (white/red-not supplied) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

IMPORTANT!

If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

ANT IN

RF coaxial cable to TV

2

INT IN TO TV VIDEO

AUDIO IN

IN

R

L

CH3 CH4

3

1

1Use the composite video cable (yellow) to

connect the DVD systemÕs VIDEO OUT jack to the video input jack on the RF modulator.

2Use an RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the

RF modulator to the Antenna IN jack on the TV.

3Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.)

13

Page 13
Image 13
Philips MCD709 user manual Using S-Videojack, Connections, English, 1Use the composite video cable yellow to