Philips MCD735/93 manual Audio Setup, Speaker Setup, Spdif Output

System Menu Options

English

Audio Setup Page

The options included in Audio Setup page are: “Speaker Setup”,“SPDIF Setup”, “Dolby Digital Setup”, “3D Processing”, “HDCD” and “Night Mode”.

Speaker Setup

The options included in Speaker Setup page are: "Downmix", "Front Speaker", "Center Speaker", "Rear Speaker", "Subwoofer" and "Test Tone".

Note:

–This option is available only when you select "5.1CH" under "Downmix".

Rear Speaker

Adjusts the volume levels for rear speakers. Options include Options include "Large", "Small" and "Off".

Note:

–This option is available only when you select "5.1CH" under "Downmix".

Subwoofer

Selects ON/OFF for the subwoofer.

Test Tone

The test tone will be automatically generated.

Note:

–This option is available only when you select "5.1CH" under "Downmix" and the disc tray is open.

SPDIF Output

Dialog

Downmix

This option allows you to set the stereo analog output of your DVD Player.

●In 'Speaker Setup Page', press 3 4 to highlight 'Downmix', then press 2 or OK.

➜LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

➜Stereo: Select this option when output delivers sound from only the two front speakers.

➜V SURR: Allows the DVD player to use virtual surround sound effects.

➜5.1CH: Select this option for 5.1-channel sound output.

Front Speaker

Adjusts the volume levels for front speakers. Options include "Large" and "Small".

Center Speaker

Adjusts the volume level for the center speaker. Options include "Large", "Small" and "Off".

The options included in SPDIF (Sony/Phillips Digital Interface Format) Setup Page are: “SPDIF Off ”, “SPDIF/Raw” and “SPDIF/PCM”.

➜SPDIF Off:Turns off the SPDIF output.

➜SPDIF/Raw: If you have connected your DIGITAL OUT (COAXIAL or OPTICAL) to a multi-channel decoder/receiver.

➜SPDIF/PCM: Only if your receiver is not capable of decoding multi-channel audio.

28