Philips MCD735/93 manual Setting the speakers, Below menu appears on the TV

Getting Started

6Press 1 2 repeatedly to select "VIDEO SETUP PAGE".

7Select "TV MODE" to "P-SCAN", then OK to confirm.

➜ The instruction menu appears on the TV.

1.ENSURE TV HAS P-SCAN.

2.CONNECT YPRPB CABLE.

3.IF TV ABNORMAL:

WAIT 15 SEC RECOVERY.

1Turn off your TV progressive scan mode or turn on to interlaced mode (refer to your TV user manual).

2Press SYSTEM on the remote to exit the system menu and then DISC and “1” to exit progressive scan.

➜ The DVD blue background screen will appear on the TV.

Step 3: Setting the speakers

English

8Press 1 2 to highlight OK in the menu and press OK to confirm.

There will be a distorted picture on your TV at this state until you turn on the progressive scan mode on your TV.

9Turn on your TV progressive scan mode (refer to your TV user manual).

➜ The below menu appears on the TV.

You can adjust the volume level for individual speakers.These adjustments let you optimize the sound according to your surroundings and setup.

●Press VOL.SEL on the remote repeatedly to select HIGH LEVEL, MID LEVEL and LOW LEVEL.

CONFIRM TO USE P-SCAN,

IF PICTURE IS GOOD,

PRESS OK BUTTON ON REMOTE.

TIME LAST 01 SECOND

0Press 1 2 to highlight OK in the menu and press OK to confirm.

➜ The setup is complete now and you can start enjoy the high quality picture.

To deactivate Progressive manually

●When the distorted sign still appears on the TV, it may be due to the connected TV does not accept progressive signals, and progressive is set by mistake.You must reset the unit to interlace format.

17