Hotpoint DSC50SS, HUE 52KS, 50HEGS Electronic Timer /Minute Minder, To set the clock, Manual Mode

Electronic Timer /Minute Minder*

Cooking time setting

Count down time setting

To set the clock

End cooking time setting

Clock

time setting

Selector button

The countdown will then be displayed; at the end of	GB
this period of time the buzzer will sound (this may be
stopped by pressing any of the buttons, or it will
stop of its own accord after one minute).

Programming the duration cooking

Note: A cooking mode must be selected before programming can take place.

1.Press the button several times until the icon and the first digit on the display flash.

2.Follow steps 2 to 5 “to set the clock” as detailed

above.

• For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

Note: This may be set while the oven is switched off or while it is switched on.

1.Press the button several times until the icon and the first two numerical digits on the display start to flash.

2.Use the “+” and “-” buttons to adjust the hour value.

3.Press the button again so that the other two numerical digits on the display begin to flash.

4.Use the “+” and “-” buttons to adjust the minute value.

5.Press the button again to confirm.

Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds have passed.

Manual Mode

The programmer after the Power up and the Clock time setting will be in ‘Manual Mode’ and shall be possible to engage the other programmer functions

using the selector.

The oven will be driven directly by the user by means of the knobs present on the control panel.

To set the timer countdown

Note: This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.

1.Press the button several times until the icon and the first two numerical digits on the display start to flash.

2.Follow steps 2 to 5 “to set the clock” as detailed above.

will stop automatically at 10:15 a.m.

Programming delayed cooking

Note: A cooking duration must be selected before delayed programming can take place.

1.Follow istruction “programming the duration cooking” as detailed above.

2.Then press the button until the icon and the two digits on the display flash.

3.Follow steps 2 to 5 “to set the clock” as detailed above.

•For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed and the end time is set to 12:30. The programme will start automatically

at 11:15 a.m.

Programming has been set when the and icons are illuminated. The TIME display shows the cooking end time and the cooking duration alternately.

To cancel a previous setting

Press button “-” up until 0 • 00.

*Available only in certain models

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 9