Care and Cleaning
GB
Cleaning the glass door with 3 panels*
TOP OVEN DOORS
Removing the retaining bar: 1.Depress carefully
the clips on
both sides of the bar. 2.Pull the trim up gently until the retainer is released.
Open the door fully and carefully slide the first inner glass towards you, taking care not to allow the glass to fall.
Repeat the same procedure with the next glass.
Now the external glass panel can be washed.
Ensure the glass panel is not subjected to any sharp mechanical blows. Take particular care not to damage the inner surface which is coated with a heat reflective layer. After cleaning, rinse and dry with a soft cloth. For slight soiling the inner glass panel may be cleaned, while still warm, without removing it from the door.
Warning: Oven must not be operated with inner door glass removed.
Glass door refitting
To reassemble the oven doors proceed with inserting the glass panels in the reverse order, pushing gently every panel directly into the liners, so that the WARNING sign printed on the glass is correctly legible.
Push the panel until it does not protrude beyond the edge of the door
Make sure the protecting bars are fitted correctly.
SIDE OPENING MAIN OVEN DOORS Cleaning the door glass is the same as the drop down doors, except take care to support the weight of the inner glass when removing and refitting.
!For the safety of the glass when
1.Depress carefully the clip on one side of the bar. 2.Pull the trim up gently until the retainer is released
Open the door fully and carefully slide the first inner glass towards you.
Repeat the action with the second glass.
The glass panel may now be washed at the sink. Stubborn stains can be removed by using a fine steel wool soap pad.
* Available in cerain model only
BE CAREFUL NOT TO DAMAGE THE GLASS WHEN REMOVING/ REASSEMBLING THE PANELS.
When refitting the glass make sure the glass and the protecting bars are fitted correctly.
20 | PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 |
|
