1
2
Connect the speakers to the SPEAKERS (8ohm) terminals with two speaker cables. Right speaker to "R" and left speaker to "L", red wire to "+" and silver wire to
For radio reception, connect the supplied MW loop antenna wires to the AM AERIAL jack.
Tip
It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit.
3
4
Connect the serial port marked CONTROL CABLE at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied control cable.
Connect the VIDEO OUTPUT jack at the rear of the DVD player to the video input jack on the TV using the supplied video cable (yellow).
Tip
See the User Manual for other TV connection options.
5 Connect the power cord of the DVD system to the AC power outlet.
Speaker
(Right)
Speaker connection for MCL707 |
| Speaker |
FM antenna MW antenna | (Left) |
|
2
4
1
3
1
5
