Prepare the remote control
Caution
•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
•• Risk of decreased battery life! Never mix different brands or types of batteries.
•• Risk of product damage! When the remote control is not used for long periods, remove the batteries.
To insert the remote control battery:
1
2
3
Set clock
1 In standby mode, press and hold CLOCK on the remote control for more than two seconds.
»»[24H] or [12H] hour format is displayed.
2 Press 
/ 
to select [24H] or [12H] hour format, and then press CLOCK.
»»The hour digits are displayed and begin to blink.
3 Press 
/ 
to set hour, and then press
CLOCK.
»»The minute digits are displayed and begin to blink.
4 Repeat step 3 to set minute.
Note
•• If no button is pressed in 90 seconds, the system exits clock setting mode automatically.
Tip
•• You can view clock information in
Turn on
Press 
.
»»The unit switches to the last selected source.
Switch to standby mode
Press 
again to switch the unit to standby mode.
»»The clock (if set) is displayed on the panel.
Switch to ECO standby mode:
Press and hold 
for more than two seconds.
»»The display panel is dimmed.
Note
•• The unit switches to Eco Power Standby mode after 15 minutes in standby mode.
Switch between standby mode and ECO standby mode:
Press and hold 
for more than two seconds.
8EN
