At a Glance

English

Using the Remote Control

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared remote sensor during opera- tion. The sensor may not be able to receive signals properly if the sensor is covered, if there is a large object between the remote control and the sensor, or if it is exposed to direct sunlight or a strong artificial light (e.g., fluorescent or strobe lights). If possible, change the position of the light source or reposition the unit to avoid direct lighting.

To use the remote, point it at the remote sensor of the player. Operate the remote within 15 feet of the sensor and at an angle of ± 60 degrees.

Battery Installation

1.Remove the battery compartment cover located on the rear of the remote control.

2.Insert two (2) “AAA” batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment.

3.Replace the cover.

Batteries in the remote will last for approximately 1 year. Replace the batteries if the remote control does not work. Always dispose of batteries according to your local municipal regulations.

The batteries used in the remote control may present a fire or chemical burn if mistreated. Do not recharge, disassemble, in- cinerate, or heat the battery (~212°F). Do not mix old with new batteries, or different types of batteries. Remove the batteries from the remote if it will not be used for a long period of time. Keep batteries away from children.

Page 18

Coby Electronics Corporation

 

 

Page 18
Image 18
COBY electronic DVD978 instruction manual Using the Remote Control, Battery Installation