USB | AUX |
1Check the USB device has been properly connected. (See Installation: Connecting an additional appliance)
2Press SOURCE once or more to select USB (or USB on the remote control)
➜The icon 
appears
–NO AUDIO appears if no audio file is found in the USB device
3Play the USB’s audio files as you do with the albums/tracks on a CD (See CD)
Note:
–For compatibility reasons, the album/track
information may differ from what it is displayed through flash players’ music management software.
–File names or ID3 tags will be displayed as
if they are not in English.
AUX (Listening to an external source)
You can listen to the sound of the connected external device through your MCM275
1Check the external device has been properly connected (See Installation, Connecting an additional appliance)
2Press SOURCE once or more to select AUX (or AUX on the remote control)
3To avoid noise distortion, turn down the volume on your external device
4Press the PLAY key on the connected device to start playback
5To adjust the sound and volume, use the sound controls on your external device and the MCM275
English
25
