18
English
3Insert a disc with the printed side facing up. Press
0 again to close the compartment.
➜CLOSE is displayed followed by READ DISC
as the CD player scans the contents of a disc,
and then playback starts automatically.
Basic playback controls
To play a disc
●Press ÉÅ to start playback.
➜The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
●Press the control knob on the front panel to the
left or right (corresponding to S/T) or
press S/T on the remote once or
repeatedly until the desired track number
appears in the display.
●You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
●To input a number larger than 10, press SHIFT
on the remote once or more to select the first
digit you want and then use the Numerical
Keypad (0~9) to input the second digit.
●If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Te xt display during playback
In CD mode
●Press DISPLAY/MENU on the remote
control repeatedly to see the following
information.
➜Tr ack number and elapsed playback time of
current track.
➜Tr ack number and remaining playback time of
current track.
➜Tr ack number and total remaining playback
time.
In MP3-CD mode
●Press DISPLAY/MENU on the remote
control to display the ID-3 information if
available.
Important!
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
●CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1Press SOURCE on the top of the system to
select CD or press CD on the remote.
2Press 0 to open the CD compartment.
➜OPEN is displayed when the compartment
cover slides up.
CD/MP3-CD Operation
pg001-031_MCM704D_37-Eng 2007.4.7, 14:5118