English
27

Clock/Timer

Setting the clock
1In Standby mode, press and hold CLOCK on
the remote until the time flashes on the display.
➜”SET CLOCK” is displayed briefly. Then, the
hour digits flash on the display screen.
2Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
3Press CLOCK to confirm.
➜The minute digits flash on the display screen.
4Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
5Press CLOCK again to confirm the clock
setting.
Notes:
–This system only supports 12-hour mode.
– The clock setting will be erased when the system
is disconnected from the power supply.
–The system will exit clock setting mode if no
button is pressed within 30 seconds.
Viewing the clock
●Press CLOCK in the active mode.
➜The clock time is displayed.
Setting the timer
●The system can be used as an alarm clock,
whereby the CD, USB, TUNER, AUX is switched
on at a set time. The clock time needs to be set
first before the timer can be used.
●During setting, if no button is pressed within 30
seconds, the system will exit timer setting mode
automatically.
1Press and hold SLEEP/TIMER on the remote
control until the time flashes on the display.
➜”SET TIMER” is displayed briefly. Then, the
hour digits flash on the display screen.
2Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
3Press SLEEP/TIMER to confirm.
➜The minute digits flash on the display screen.
4Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
5Press SLEEP/TIMER to confirm the time
setting.
➜”OFF” flashes on the display screen.
6 Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to select
“ON”.
➜ icon appears on the display screen.
To deactivate the timer
●Select “OFF” at Step 6.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●Press SLEEP/TIMER on the remote control.
➜The display shows one of the sleep time
options in the following sequence: SLEEP-OFF,
SLEEP-10, SLEEP-20, ... SLEEP-90,
SLEEP-OFF ... Once the sleep funtion is
activated, the SLEEP icon will be displayed.
●To deactivate, press SLEEP/TIMER on the
remote control once or more until OFF is
shown, or press STANDBY-ON/ ECO
POWER B (or B on the remote).
➜SLEEP disappears.
pg001-031_MCM704D_37-Eng 2007.4.7, 14:5127