TAPE
IMPORTANT!
–Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
–
–Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer,TV or speaker).
To change the playback side
●On the remote control, press í or ë
➜ A (BACK) or B (FRONT) appears on the display, depending on the tape side selected
To change the playback mode
●Press TAPE A/B on the remote control repeatedly to select the different playback modes
å
∂
∫
English
Playing a tape
1Press TAPE/AUX once or more to select TAPE(or TAPE on the remote control)
2Press OPEN/CLOSE 0 to open the tape deck door
ALBUMSTOP / DEMO
OPEN CLOSE
3Insert a recorded tape and close the tape deck door.
➜ Load the tape with the open side downward and full spool to the left
4Press ÉÅto start playback
➜At the end of one side, the tape playback will be automatically reversed and start from the beginning of the other side
➜A (BACK) or B (FRONT) appears
To rewind or fast forward
1Press à or á on the remote control
2Press Ç when you reached the desired passage ➜ The tape will stop automatically at the end of rewinding or fast forwarding.
To stop playback
●Press Ç
Helpful hints:
– During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or TUNER, for example).
Recording to a tape
General information on recording
●For recording, use only tape of IEC type I (normal tape).
●The recording level is set automatically, regardless of the position of the Volume, Incredible Surround, BASS/TREBLE and so forth.
●The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.
●To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
●If “CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.
29
