Philips MCP9350I/22 Connecting antennas, Inserting the batteries in the remote control

16
Radio antenna connection
1Connect a coaxial cable (not supplied) to the RF IN
FM connector (1) of the Media Center.
2Connect the other end of the cable to the cable anten-
na system.
If your are not connected to a cable antenna system, you
can use the FM cable.
1Connect the FM cable to the RF IN FM (1) connector
of the Media Center.
2Position and vary the direction of the FM antenna until
you find the strongest reception.Then secure the anten-
na in that position.
Wallsocket
10cm
TV antenna connection
1Disconnect the TV antenna cable from the cable anten-
na system.
2Connect the 10 cm TV antenna cable to the RF IN TV
socket (2) of the Media Center and to the cable
antenna system.
Connecting antennas
1Remove the battery compartment cover and insert two
AA (1.5 V) batteries, noting the + and – configuration in
the battery compartment.
2Replace the cover.
Inserting the batteries in the remote control
2 x
MCP9350i-22_EN.qxd 03-04-2006 15:05 Pagina 16