Philips MDV530VR owner manual Video Cassette Playback, Details are on pages

18 Video Cassette Playback

Read and follow the steps below to play a tape.

1 Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO IN channel. This depends on how you connected the DVD/VCR to a TV.

Details are on pages 7-15.

2 With the DVD/VCR power off, insert a tape in the cassette compartment of the DVD/VCR. The STANDBY-ON and VCR lights will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, playback will start automatically.

If the DVD/VCR power is already on, press VCR to put the DVD/VCR in VCR mode if necessary. The green VCR

1 Turn on the TV.

2 Insert a tape in the DVD/VCR.

		STANDBY-ON
TIMER SET
SETUP	AUDIO SUBTITLE	ANGLE
REC	REPEAT	REPEAT
		A-B
	C-RESET
SKIP/	CLEAR	SKIP/
CH		CH
TITLE	MODE	RETURN

light will appear on the front of the DVD/VCR.

3 If playback does not start automatically, press VCR, then press PLAY B.

4 Press STOP C to stop playback.

5 Press REW h to rewind the tape.

4

5

DVD

DISC

MENU

STOP

REW

1

DISPLAY

VCR

OK

PLAY

FF

PAUSE

SPEED

2 3

SLOW

3

6 After the tape stops, press STOP/EJECT CA on the front of the DVD/VCR to remove the tape.

4 5 6

6 Press STOP/EJECT CA on the DVD/VCR.

Helpful Hints

•Other tape playback features are on pages 40-47.

•If AUTO REPEAT is ON, playback will begin when you insert a tape, even when the record tab is intact. Details are on page 40.

•You must connect the DVD/VCR to a TV using the RF coaxial cable or the audio/video cables in order to use the VCR features. These hookups are explained on pages eight and 11.