Philips MME-100 Basic Functions, Adjusting volume and sound, Switching the system on, English

		Basic Functions
		Adjusting volume and sound
	1	Press VOLUME(VOL 3 / 4 on the remote
		control) to increase or decrease volume.
		➜ Display shows the volume level VOL and a
		number from 0-32.
	2	Press DBB 1 or DBB 2 (DBB on the remote
		control) to switch bass enhancement on or off.
		➜ Display shows:	or	if the DBB is
		activated.
	3	Press MUTE on the remote
		control to interrupt sound
IMPORTANT:		reproduction instantly.
		➜ Playback will continue
Before you operate the system, complete
		without sound and the display
the preparation procedures.
		shows MUTE.
Switching the system on	●	To activate sound reproduction you can:
● Press STANBY-ON to SOURCE.		– press MUTE again;
		– adjust the volume controls;
➜ The system will switch to the last selected
		– change source.
source.

●press CD, TUNER or TAPE on the remote control.

➜ The system will switch to the selected source.

To switch the system to standby mode

●Press STANBY-ONon the system or remote control.

●If in tape mode or recording mode, press STOP•OPEN first.

➜ The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player's memory.

Power-saving automatic standby

As a power-saving feature, the system automatically switches to standby 15 minutes after a tape or CD has reached the end and no control is operated.

English

13