Philips MX3660D Playing a disc, Make sure your DVD system and TV are connected and turned on

continue...

SUPER VIDEO

DVD VIDEO DIGITAL SURROUND SYSTEM

STANDBY-ON

OPEN•CLOSE

PLAY•PAUSE	STOP	PROGRAM	BASS
PREV	NEXT	SURROUND	TREBLE
		SOURCE	VOLUME

Make sure your DVD system and

TV are connected and turned on!

Playing a disc

1 Press DISC on the remote control.

You can also adjust the SOURCE button on the front panel until “DISC” appears on the display panel.

2 Turn on the TV and select the correct Video In mode.

You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system). Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or

VIDEO.

Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

Or, your TV remote control may have a button or switch that chooses different video modes. Do not use channel 3 or 4 on the TV unless you are using an RF modulator.

See your TV manual for more details.

3 Press OPEN•CLOSE 0 on the front of the DVD system and load a disc, then

press the OPEN•CLOSE 0 again to close the disc tray.

Make sure the disc label facing up. For double-sided discs, load the side you want to play facing up.

4 Playback will start automatically. If not, press ÉÅbutton.

If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the instructions given in the disc menu.

5 To stop playback, press STOPÇ.

Region Codes

DVDs must be labeled for ALL regions or for	ALL	1
Region 1 in order to play on this DVD system.

DVD system Video Output Selection for Proper Playback

1)Press SYSTEM MENU button.

The	icon will be highlighted in the menu bar on the TV
screen.

2)Press 4 button to select the Picture Setup Menu item .

3)Press 2 button to enter the Menu.

4)Press 4 button to select ‘VIDEO OUT’ and 2 button to enter the Menu.

5)Press 34 to select and highlight :

S-VIDEO - if you use the S-Video connection.

PR PB Y/SCART - if you use the Component Video Pr/Cr Pb/Cb Y

6)Press OK button to confirm.

PR PB Y / SCART

CVBS & S-VIDEO

Note: SCART control not available for use with your DVD system.

Detailed playback features and additional functions are described in the

accompanying owner’s manual.