Other Functions
E n g l i s h
Tuning to radio stations
1Press STANDBY ON to switch on the last selected source.
2Adjust SOURCE (or press TUNER) to select TUNER mode.
3Press TUNER again to select the desired band : FM or AM.
4Press and hold S or T until the frequency indication starts to change, then release.
➜ The system automatically tunes to the next strong radio station.
●To tune to a weak station, press S or T briefly and repeatedly until an optimal reception is found.
5Repeat step 4 if necessary until you find the desired radio station.
Presetting radio stations
You can preset up to 40 stations regardless of the reception.
1Tune to your desired radio station (refer to “Tuning to radio stations”).
2Press PROGRAM.
➜ “Program” appears.
Program
3Use the numeric keypad
Listening to preset radio
stations
●In tuner mode, press 1 or 2 or use the numeric keypad
➜ The preset number, radio frequency, and waveband are displayed.
Sleep timer setting
The sleep timer enables the system to switch to standby mode automatically at a preset time.
1Press SLEEP repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...
2When you reach the desired length of time, stop pressing the SLEEP button.
➜“Sleep” icon appears.
To check the remaining length of time after sleep timer is activated
●Press SLEEP once.
To change the preset sleep timer
●Press SLEEP again while the remaining sleep timer is shown.
➜ The display will show the next sleep timer options.
To deactivate the sleep timer
●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.
Program
Note:
–If “Program” icon goes off before you select the desired preset number, press PROGRAM again.
4Press PROGRAM again to store the radio station.
●Repeat steps
–If you attempt to program more than 40 preset radio stations, "FULL" is displayed.
–During programming, if no key is pressed within five seconds, the system will exit the program mode automatically.
22OTHER FUNCTIONS
