5Listen to FM radio stations
1 Turn the SOURCE knob to select FM source.
2 Search for radio stations automatically or manually.
Note
•• For optimal reception, fully extend the antenna and adjust its position.
•• You can store a maximum of 20 FM radio stations.
Search for a radio station automatically
1 Press and hold 
/ 
for more than 2 seconds.
»»The radio automatically tunes to a station with strong reception.
2 Repeat step 1 to tune to more stations.
»»When a radio station with a strong signal is detected, the search stops and the radio station is broadcast.
Program radio stations automatically
1 Press CLOCK/PROG for more than 2 seconds to activate automatic program mode.
»»All available stations are programmed in the order of waveband reception strength.
»»The first programmed radio station is broadcast automatically.
2 Press 
/ 
to select preset radio stations.
Program radio stations manually
1 Press
/
to tune to a radio station.
2 Press CLOCK/PROG to activate the programming.
3 Press
/
to allocate a number to this radio station.
4 Press CLOCK/PROG to confirm.
»»The radio station is stored with the selected sequence number.
5 Repeat steps
Note
•• If a radio station is stored over the sequence number of a previously saved station, the earlier station will be overwritten.
Select stereo/mono broadcast
To improve the reception of stations with weak signals, monaural sound should be selected.
•In tuner source, press FM/ST/MO to select a setting:
•[STEREO]: stereo broadcast.
•[MONO]: monaural broadcast.
14EN
