Philips Semiconductors Product specification
PDIUSBH12USB 2-port hub
1999 Jul 22 18
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER TEST CONDITIONS MIN MAX UNIT
VCC DC supply voltage 3.0 3.6 V
VIDC input voltage range 0 5.5 V
VI/O DC input voltage range for I/O 0 5.5 V
VAI/O DC input voltage range for analog I/O 0 VCC V
VODC output voltage range 0 VCC V
Tamb Operating ambient temperature range in free air See DC and AC characteristics per device –40 85 °C
ABSOLUTE MAXIMUM RATINGS1
SYMBOL PARAMETER TEST CONDITIONS MIN MAX UNIT
VCC DC supply voltage –0.5 +4.6 V
IIK DC input diode current VI < 0 –50 mA
VIDC input voltage Note 2 –0.5 +5.5 V
VI/O DC input voltage range for I/O’s –0.5 VCC + 0.5 V
IOK DC output diode current VO > VCC or VO < 0 ±50 mA
VODC output voltage Note 2 –0.5 VCC + 0.5 V
IODC output sink or source current for other pins VO = 0 to VCC ±15 mA
IODC output sink or source current for D+/D– pins VO = 0 to VCC ±50 mA
IGND, ICC DC VCC or GND current ±100 mA
VESD Electrostatic discharge voltage IIL < 1 µA3—±4000 4V
TSTG Storage temperature range –60 +150 °C
PTOT Power dissipation per package
NOTES:
1. Stresses beyond those listed may cause damage to the device. These are stress ratings only and functional operation of the device at these
or any other conditions beyond those listed in the RECOMMENDED OPERATING CONDITIONS table is not implied. Exposure to absolute
maximum rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
3. Values are given for device only: in-circuit VESD(MAX) = ±8000 V.
4. For open-drain pins VESD(MAX) = ±2000 V.