Philips PDIUSBH12 DC CHARACTERISTICS (Digital pins), DC CHARACTERISTICS (AI/O pins), LOAD FOR D+/D

Philips Semiconductors Product specification
PDIUSBH12USB 2-port hub
1999 Jul 22 19
DC CHARACTERISTICS (Digital pins)
SYMBOL PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Input Levels
VIL LOW level input voltage 0.6 V
VIH HIGH level input voltage 2.7 V
VTLH LOW to HIGH threshold voltage ST (Schmitt Trigger) pins 1.4 1.9 V
VTHL HIGH to LOW threshold voltage ST pins 0.9 1.5 V
VHYS Hysteresis voltage ST pins 0.4 0.7 V
Output Levels
VOL
LOW level out
p
ut voltage
IOL = rated drive 0.4 V
V
OL
LOW
level
out ut
voltage
IOL = 20 µA 0.1 V
VOH
HIGH level out
p
ut voltage
IOH = rated drive 2.4 V
V
OH
HIGH
level
out ut
voltage
IOH = 20 µA VCC – 0.1 V
Leakage Current
IOZ OFF state current OD (Open Drain) pins ±1µA
ILInput leakage current ±1µA
ISSuspend current Oscillator stopped and
inputs to GND/VCC 15 µA
IOOperating current 02 ports operating 13 mA
DC CHARACTERISTICS (AI/O pins)
SYMBOL PARAMETER TEST CONDITIONS MIN MAX UNIT
Leakage Current
ILO Hi-Z state data line leakage 0V < VIN < 3.3V ±10 µA
Input Levels
VDI Differential input sensitivity |(D+) – (D–)|10.2 V
VCM Differential common mode range Includes VDI range 0.8 2.5 V
VSE Single-ended receiver threshold 0.8 2.0 V
Output Levels
VOL Static output LOW RL of 1.5kΩ to 3.6V 0.3 V
VOH Static output HIGH RL of 15kΩ to GND 2.8 3.6 V
Capacitance
CIN Transceiver capacitance Pin to GND 20 pF
Output Resistance
ZDRV2Driver output resistance Steady state drive 28 43 Ω
Integrated Resistance
ZPU Pull-up resistance SoftConnect = ON 1.1 1.9 kΩ
ZPD Pull-down resistance Pull-down = ON 11 19 kΩ
NOTES:
1. D+ is the symbol for the USB positive data pin: UP_DP, DN2_DP , DN3_DP.
D– is the symbol for the USB negative data pin: UP_DM, DN2_DM, DN3_DM.
2. Includes external resistors of 22 W ± 1% each on D+ and D–.
LOAD FOR D+/D–
D. U. T.
TEST POINT
CL = 50pF
1.5kΩ IS INTERNAL
15kΩ
22Ω
SV00849