PREPARATIONS
Power supply
Using the AC / DC adaptor
Turn off the player before connecting the supplied adapter to it and the main power supply (as shown). The player must be turned off when the battery charges.
✔TIP
To avoid damage to the player, switch off before plugging or unplugging the AC adaptor.
Using the car adapter
Connect the supplied car adapter to the set and the car cigarette lighter outlet.
✔TIP
•To avoid damage to the player, switch off before plugging or unplugging the car adaptor.
•When connecting with car power (cigarette lighter) adaptor, be sure the input voltage of the adaptor is identical with car voltage.
•Make sure the temperature is below 35oC when the DVD player is con- nected to DC 16.0V in a car.
Powering your remote control
1Open the battery compartment. Remove the protective
plastic tab (first time users only).
2 Insert 1 x lithium 3V battery, type CR2025, then close the compartment.
CAUTION
-Batteries contain chemical substances, so they should be disposed of properly.
-Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
-Incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to burst.
