Philips Portable DVD Player PET708 |
| wk7253 |
Quick start guide |
| |
1 Charge | 2 Enjoy | 3 Connect to TV |
1Switch OFF the set. Attach the battery pack as shown.
2You can hear clear ‘click’ sound when it is successfully attached.
4
3
3Connect the supplied adapter to the set and the AC outlet.
4RED light turns on.
5The battery pack will be fully charged in approximately 4 hours.When the RED light goes out, it means that the battery pack is fully charged.
TIP Your battery will continue to charge while the player is in use. However, the RED light will be lit and it will take approximately 8 hours to fully charge the battery pack.
1
7
2
8
4 | 3 | 6 |
1Open the lid.
2Switch ON the set.
3The GREEN light turns on.
4Open the DVD door using the OPEN switch.
5Remove protective card (if any).
6Load the DVD disc.
7Close the DVD door and the set will automatically start to playback.
8Use control keys on the set or remote control.
White
Red
Yellow
1Connect the set to TV as shown.
2Please select appropiate input or source on the TV.You can consult the owner’s manual of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.)
PHILIPS
