GENERAL INFORMATION

Handling discs

• Do not attach paper or tape to the disc.

• Keep the disc away from direct sunlight or heat sources.

• Store the disc in a disc case after playback.

To clean, wipe the disc outwards from the center with a soft, lint-free clean cloth.

On handling the LCD screen

The LCD is manufactured using high precision technology. You may, however, see tiny black points and/or bright points(red,blue,green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does not indi- cate a malfunction.

Environmental information

We have reduced the packaging to its minimum and made it easy to separate into mono materials: cardboard, PS, PE and PET.

Your set consists of material which can be recycled if disassembled by a special- ized company. Please observe the local regulations to dispose of packaging, exhausted batteries and old equipment.

Copyright information

All other brand and product names are trademarks of their respective companies or organizations.

Unauthorized duplication of any recordings downloaded from the internet or made from CDs / VCDs / DVDs is a violation of copyright laws and international treaties.

 

PREPARATIONS

English

 

 

Power supply

 

 

Using the AC / DC adaptor

Turn off the player before connecting the supplied adapter to it and the main power supply (as shown). The player must be turned off when the battery charges.

TIP

The plug is a disconnect device and shall remain readily operable.

To avoid damage to the player, switch off before plugging or unplugging the AC adaptor.

Using the car adapter

Connect the supplied car adapter to the set and the car cigarette lighter outlet.

TIP

To avoid damage to the player, switch off before plugging or unplugging the car adaptor.

When connecting with car power (cigarette lighter) adaptor, be sure the input voltage of the adaptor is identical with car voltage.

Make sure the temperature is below 35oC when the DVD player is con- nected to DC 16.0V in a car.

Powering your remote control

1Open the battery compartment. Remove the protective

plastic tab (first time users only).

2 Insert 1 x lithium 3V battery, type CR2025, then close the compartment.

CAUTION

-Batteries contain chemical substances, so they should be disposed of properly.

9

Page 9
Image 9
Philips PDCC-XP-0845, PET737/58 user manual Preparations