Philips Semiconductors Product specification
TOPFET dual high side switch PIP3202-DC LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VBG Continuous supply voltage 0 50 V
ILContinuous load current per channel Tmb ≤ 135˚C - 8 A
PDTotal power dissipation Tmb ≤ 25˚C - 83.3 W
Tstg Storage temperature -55 175 ˚C
TjContinuous junction temperature1-40 150 ˚C
Reverse battery voltages2
VGB Continuous reverse voltage - 16 V
VGB Peak reverse voltage - 32 V
Application information
RI, RSExternal resistors3to limit input, status currents 3.2 - kΩ
Input and status currents
IIContinuous input current -5 5 mA
ISContinuous status current -5 5 mA
IIRepetitive peak input current δ ≤ 0.1, tp = 300 µs -50 50 mA
ISRepetitive peak status current δ ≤ 0.1, tp = 300 µs -50 50 mA
Inductive load clamping VBG = 13 V, IL = 8 A
EBL Non-repetitive clamping energy (one Tj = 150˚C prior to turn-off - 150 mJ
channel)
ESD LIMITING VALUE
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCElectrostatic discharge capacitor Human body model; - 2 kV
voltage C = 250 pF; R = 1.5 kΩ
1 For normal continuous operation. A higher Tj is allowed as an overload condition but at the threshold Tj(TO) the over temperature trip operates
to protect the switch.
2 Reverse battery voltage is allowed only with external resistors to ensure that the input and status currents do not exceed the limiting values.
The internal ground resistor limits the reverse battery ground current. The connected loads must limit the reverse load currents. Power
is dissipated and the Tj rating must be observed.
3 To limit currents during reverse battery and transient overvoltages (positive or negative).
September 2001 2 Rev 1.000