Philips PR1306C1 manual Basic Antenna Signal Connections, If your antenna has a round

BASIC ANTENNA SIGNAL CONNECTIONS

ANTENNA

SMART

Acombination antenna receives normal broadcast channels

(VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75Ω (ohm) antenna plug on the back of your TV - and that’s where the antenna goes.

BEGIN

If your antenna has a round

cable (75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat twin-lead

wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.

Push the round end of the adapter (or antenna) onto the 75Ω plug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down tight.

Note: For homes with separate UHF and VHF antennas you will need an optional combiner to connect to the TV.

U/V

Combiner

75 V

Back of TV

75-300 Ohm Adapter

HELP

Remember: Be sure to set the TV for the type sig- nal you've connect- ed (see the “Cable” section on page 11 of this manual.)

To set the TV to select only the chan- nel numbers in your area see how to “Program" or "Add" channels in the TV’s memory on page 12 (Auto Program sec- tion).

To order any option- al accessory contact your dealer or the Philips Parts Center at 1-800-851-8885.

75 V

Back of TV

Combination VHF/UHF

Antenna

(Outdoor or Indoor)

300 to 75Ω

1 Adapter

Twin Lead

Wire

OR

Round Cable 75Ω

2

75V

6