Philips PT-LB51SU manual OPTION menu, Input Guide, Function Button, Startup Logo, COMPUTER2 SELECT

OPTION menu

Remote control Control panel

See “Navigating through the MENU” on page 27. See “Main menu and Sub-menu” on page 28.

INPUT GUIDE

When the input signal is changed, the input signal information will be displayed in the upper right corner of the projected images. You can select the level of the input signal information.

Options	Function
OFF	The input signal information will not
	be displayed.
SIMPLE	Only the name of the input signal will
	be displayed.
DETAILED	The input signal information will be
	displayed in detail.

NOTE:

•If “INPUT GUIDE” is set to “DETAILED”, the guide screen for computer connection will be displayed when COMPUTER1 or COMPUTER2 is selected and no signal is being input to the COMPUTER1 IN or COMPUTER2 IN connector. If you would like the guide screen not to be displayed, set “INPUT GUIDE” to “SIMPLE” or “OFF”.

FUNCTION BUTTON

You can assign frequently-used operations to the FUNCTION button on the projector and use it as a convenient shortcut button. The functions which can be set are “SHUTTER”, “AUTO SETUP”, “PICTURE MODE”, “FREEZE” and “INDEX WINDOW”.

Use I H to select the function to assign to the FUNCTION button.

SHUTTER				AUTO SETUP
INDEX WINDOW			PICTURE MODE
	FREEZE
SHUTTER		Operates the shutter function
		See “SHUTTER” on page 36
		Starts the automatic position
AUTO SETUP		correction function
		See “AUTO SETUP” on
		page 35
		Switches the picture mode
PICTURE MODE		See “PICTURE MODE” on
		page 30.
		Operates the freeze function
FREEZE		See “Capturing an image” on
		page 24
		Operates the INDEX-
INDEX WINDOW		WINDOW function
		See “INDEX-WINDOW” on
		page 36

Settings

STARTUP LOGO

You can switch the logo on/off that is displayed when starting up the projector. Press I H to select the required option.

ON	Active
OFF	Deactive

COMPUTER2 SELECT

You can switch the function of the COMPUTER2 IN/ 1 OUT terminal.

INPUT	COMPUTER2 IN
OUTPUT	COMPUTER1 OUT

LAMP POWER

This setting changes the lamp brightness. When set to “ECO-MODE”, the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. This can help to extend the lamp’s operating life. If using the projector in small rooms where high luminance is not required, it is recommended that you set the “LAMP POWER” to “ECO-MODE”.

STANDARD	Normal mode
ECO-MODE	ECO mode

NOTE:

•“LAMP POWER” cannot be set when no signal is being input.

ENGLISH - 34