Philips QS6140 Tips, Trimming is easier when the skin and hair are dry, Trimming without comb

10English

4Press the trimming head on/off button once to switch on the trimming head.

,, QS6160 only:The on/off button lights up to indicate that the trimming head is operating.

5 To trim the hair, move the trimming comb through the hair slowly.

Tips

-- Always make sure that the tip of the trimming comb points in the direction in which you move the appliance.

-- Make sure that the flat part of the trimming comb is always in full contact with the skin to obtain an even hair length result.

-- Since hair grows in different directions, you need to move the appliance in different directions as well (upward, downward or across).

-- You can switch on the trimming head while the shaving head is operating. If you do this, the shaving head is switched off immediately.  

-- Trimming is easier when the skin and hair are dry.

6When you are finished, press the trimming head on/off button again

to switch off the trimming head.

Trimming without comb

The comb keeps the trimming head at a set distance from your head.You can use the trimming head without comb.If you use the trimming head without comb, your hair is cut off close to the skin (approx. 0.5 mm).

1To remove the comb, pull it off the appliance.

Never pull at the flexible top of the comb. Always pull at the bottom part.

2Press the trimming head on/off button to switch on the trimming head.

3Hold the appliance with the trimming head pointing upwards and

make downward strokes with the broad side of the trimming head.