English
17
Step 1: Basic Recorder Connections
C. Connecting the IDE control cables
COMPONENT VIDEO OUT
Connect the terminals marked
CONTROL CABLE A and
CONTROL CABLE B on the rear of
the micro recordable theatre to the
corresponding terminals on the rear of
the power ampli er with the supplied 40-
pin and 36-pin IDE  at control cables by
matching the pins.
D. Connecting the ground
cables
COMPONENT VIDEO OUT
Connect the two ground cables  xed at
the bottom of the DVD recordable
player to the ground ( ) terminals on
the rear of the HDD. Then, fasten the
screws as shown to ensure  rm
connection.
E. Connecting FM antenna
Connect the supplied FM antenna to the
FM ANTENNA terminal on the rear
of the subwoofer. Fully extend and
adjust the position of the antenna for
optimal reception.
For better FM stereo reception, connect
an outdoor FM antenna to the FM
ANTENNA terminal.
Helpful Hint:
– This system does not support MW
reception.
pg001-pg080_RTH718_eng_98.indd 17pg001-pg080_RTH718_eng_98.indd 17 2006-10-20 10:41:44 AM2006-10-20 10:41:44 AM