3
EN
Getting startedInstall
1Insert the CD supplied with your product into the CD ROM drive of your PC.
2Follow the onscreen instructions to complete the installation of the Firmware manager and if required, device drivers.
3If the installation program does not start automatically, browse the CD contents via Windows Explorer and run the
program by double clicking on the file ending with .exe.
Lost your CD? Dont worry, you can download the CD contents from www.philips.com/supportor
www.philips.com/usasupport(for U.S. residents).
Windows 98SE user:
To avoid installation problems, do not connectyour device to the computer until after installation
completes.
Connect

Insert the battery

1Remove the USB cap. 2Remove the battery door by sliding
it in the direction of arrow.
3Insert the supplied AAA battery into
the battery compartment.

Read the battery level indication of your player

The approximate power levels of your battery are indicated as follows:
Full Two-thirds full Half full Low Empty
TIP
When the batteries are nearly empty, the battery low screen
blinks. Your player will power down in less than
60 seconds. Your player will save all settings and un-finished recordings before it powers down.