Philips SBC VL1400 manual Wireless TV Link, Safety precautions

Models: SBC VL1400

1 42
Download 42 pages 13.61 Kb
Page 1
Image 1

2 ENGLISH

ENGLISH 3

 

 

Wireless TV Link

SBC VL1400

The Philips Wireless TV Link allows you to distribute any kind of video signal (digital or analogue set-top boxes, DVDs, satellite receivers, VCRs etc.) or cable programmes throughout your house without the need for extra wiring, running cables or drilling holes. This means that you can enjoy the freedom of watching Pay- TV on your bedroom TV. You can also enjoy a film playing on your living-room video recorder while others independently watch their favourite programmes on the main TV.

Besides distributing video signals wirelessly , the Wireless TV Link also functions as a switch box for your main TV. It is equipped with four SCART input connectors. These allow you to connect up to four video devices at the same time, so cable swapping or re-configuring your audio/video set-up is no longer necessary. In addition, three of the SCART inputs can be linked to the fourth one, which makes copying your video content very simple.

The universal remote control allows you to control the Wireless TV Link, your second TV and up to four video sources, regardless of brand.You don’t have to carry around the other remote control units!

The Wireless TV Link is based on wireless RF technology that offers you in-home convenience. To enable you to enjoy the best possible performance, four transmission channels are provided so you can select the channel that provides optimum viewing with the minimum of interference.

Pure wireless home convenience!

Safety precautions

Please read this guide carefully and keep it for future reference.

Do not use this product in moist places or close to water.

Do not expose this product to extreme heat.

Do not open this product; in case of technical difficulties bring it to your Philips retailer.

Do not cover this product.

Only connect the AC power adapters to a power supply of 220-240 VAC / 50Hz.

Only use the AC power adapters included or a type that complies with safety

 

standard EN60950 and that has the following specification: 12 Volt DC / 500mA.

Inadequately protected or sensitive electronic equipment may be affected by the use of this product. This interference can lead to damage to either equipment. Please check whether or not surrounding equipment can be affected by this product before you start using it.

 

 

Keys and functions

 

 

 

Product illustration

A

Transmitter Unit

on inside flap:

1

Power button

 

 

switches the transmitter between stand-by and on.

 

2

Power light

 

 

red in stand-by mode, green when power is on, flashes when receiving remote

 

 

control commands

 

3

COPY SOURCE button

 

 

links SCART input 1,2,3 or SCART OUT to SCART in/output 4.

 

4

Copy source indication lights

 

 

indicate which SCART input (1,2 or 3) is linked to SCART in/output 4. When

 

 

there is no light indication the SCART OUT is linked to SCART in/output 4.

 

5

VIEW SOURCE button

 

 

selects which SCART input (1-4) is viewed on the transmitter SCART output

 

6

View source indication display

 

 

indicates the SCART input number that is viewed on the transmitter output.

 

7

AUTO light

 

 

indicates if automatic SCART switching is enabled (on) or disabled (off).

 

8

Infra-red remote control blaster lights

 

 

transmit infra-red remote control signals from the receiver to the video

 

 

source devices below.

 

9

Transmission channel switch

switches the frequency channel of the audio/video signal to minimize interference.

10SCART input (1-4) connectors

connect SCART-enabled video source devices to these connectors

11SCART output connector connect to the main TV

12RCA sound output connector connect to an audio amplifier

13DC power input

14Remote control blaster cord connector

15Remote control blaster cord

four infra-red lights used instead of the infra-red remote control blaster lights (A-8) for a more precise control of the video sources.

16SCART cable

17Power adapter

18Remote control antenna

Page 1
Image 1
Philips SBC VL1400 manual Wireless TV Link, Safety precautions