Philips SDV1225T/27 user manual For VHF reception, For UHF reception

4Set up SDV1225T/27

For VHF reception

1 Extend the telescopic dipoles to the longest possible length.

2 Turn the TV to the desired channel. Move the dipoles in different directions up and down until the reception is achieved.

For UHF reception

1 Turn the TV to the desired channel. Point the UHF reflector towards the transmitter until reception is achieved.

-or-

Tip

•• For best reception, point the antenna in the direction of the transmitter.

Set up a digital tuner with this antenna

You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has

set up properly before the tuner can receive viewable channels.

There are two ways to connect the antenna to the TV:

•Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .

•Connect the antenna directly to the TV.

Tune to the analogue channels and find the best antenna location. Then re- connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner.

8EN